4115 61 Ave SE #2, Calgary, AB T2C 1Z6, Canada+1 825 454 66 97
CNCvalue.ca

Catalog

Total found: 463
Brand:
8 mm Carbide End Mill, 0.5 mm Corner Radius, 4 Flutes, Standard length, For P, M, K materials, AlCrN coated, LOC 20 mm
8 mm Carbide End Mill, 0.5 mm Corner Radius, 4 Flutes, Standard length, For P, M, K materials, AlCrN coated, LOC 20 mm
80147226Made to order

CA$42.74

excl. taxes
10 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, LOC 25 mm
10 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, LOC 25 mm
80147219Made to order

CA$71.76

excl. taxes
10 mm Carbide End Mill, 4 Flutes, 0.1 mm Corner Chamfer, Standard length, For P, M, K materials, AlCrN coated, LOC 25 mm
10 mm Carbide End Mill, 4 Flutes, 0.1 mm Corner Chamfer, Standard length, For P, M, K materials, AlCrN coated, LOC 25 mm
80147217Made to order

CA$72.14

excl. taxes
10 mm Carbide End Mill, 0.5 mm Corner Radius, 4 Flutes, Standard length, For P, M, K materials, AlCrN coated, LOC 25 mm
10 mm Carbide End Mill, 0.5 mm Corner Radius, 4 Flutes, Standard length, For P, M, K materials, AlCrN coated, LOC 25 mm
80147230Made to order

CA$74.51

excl. taxes
12 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, LOC 30 mm
12 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, LOC 30 mm
80147222Made to order

CA$100.39

excl. taxes
12 mm Carbide End Mill, 4 Flutes, 0.1 mm Corner Chamfer, Standard length, For P, M, K materials, AlCrN coated, LOC 30 mm
12 mm Carbide End Mill, 4 Flutes, 0.1 mm Corner Chamfer, Standard length, For P, M, K materials, AlCrN coated, LOC 30 mm
80147223Made to order

CA$100.87

excl. taxes
12 mm Carbide End Mill, 0.5 mm Corner Radius, 4 Flutes, Standard length, For P, M, K materials, AlCrN coated, LOC 30 mm
12 mm Carbide End Mill, 0.5 mm Corner Radius, 4 Flutes, Standard length, For P, M, K materials, AlCrN coated, LOC 30 mm
80147225Made to order

CA$103.62

excl. taxes
12 mm Carbide End Mill, 4 Flutes, Flat, Long, For P, M, K materials, AlCrN coated, LOC 45 mm
12 mm Carbide End Mill, 4 Flutes, Flat, Long, For P, M, K materials, AlCrN coated, LOC 45 mm
80147229Made to order

CA$130.10

excl. taxes
1/4 Carbide end mill, 4 flute, TiAlN, 0.5 shank x 0.75 LOC, helix angle 38, 0.016 chamfer
1/4 Carbide end mill, 4 flute, TiAlN, 0.5 shank x 0.75 LOC, helix angle 38, 0.016 chamfer
A01-4063Archive
1/8" Carbide Square End Mill, 2 flutes, 0.5" LOC, Uncoated
1/8" Carbide Square End Mill, 2 flutes, 0.5" LOC, Uncoated
80137788Archive
1/8" Carbide Ball Nose End Mill, 2 flutes, 0.5" LOC, AlCrN Coated
1/8" Carbide Ball Nose End Mill, 2 flutes, 0.5" LOC, AlCrN Coated
80137741Archive
1 mm Carbide End Mill, 3 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 37 degree/39 degree/41 degree, LOC 3 mm
1 mm Carbide End Mill, 3 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 37 degree/39 degree/41 degree, LOC 3 mm
EM356-3TL-010Archive
3 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 45 degree, LOC 25 mm
3 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 45 degree, LOC 25 mm
EM356-2TL-030Archive
4 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 45 degree, LOC 12 mm
4 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 45 degree, LOC 12 mm
EM356-2TL-040Archive
1.5 mm Carbide End Mill, 3 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 37 degree/39 degree/41 degree, LOC 4 mm
1.5 mm Carbide End Mill, 3 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 37 degree/39 degree/41 degree, LOC 4 mm
EM356-3TL-015Archive
2 mm Carbide End Mill, 3 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 37 degree/39 degree/41 degree, LOC 6 mm
2 mm Carbide End Mill, 3 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 37 degree/39 degree/41 degree, LOC 6 mm
EM356-3TL-020Archive
2.5 mm Carbide End Mill, 3 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 37 degree/39 degree/41 degree, LOC 8 mm
2.5 mm Carbide End Mill, 3 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 37 degree/39 degree/41 degree, LOC 8 mm
EM356-3TL-025Archive
3 mm Carbide End Mill, 3 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 37 degree/39 degree/41 degree, LOC 8 mm
3 mm Carbide End Mill, 3 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 37 degree/39 degree/41 degree, LOC 8 mm
EM356-3TL-030Archive
4 mm Carbide End Mill, 3 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 37 degree/39 degree/41 degree, LOC 12 mm
4 mm Carbide End Mill, 3 Flutes, Flat, Standard length, For N materials, Uncoated, Helix angle 37 degree/39 degree/41 degree, LOC 12 mm
EM356-3TL-040Archive
2.5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 45 degree
2.5 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 45 degree
EM281-4TL-025Archive
4 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 45 degree, LOC 12 mm
4 mm Carbide End Mill, 4 Flutes, Flat, Standard length, For P, H materials, TiSiAlCrN coated, Helix angle 45 degree, LOC 12 mm
EM281-4TL-040Archive
1.5 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 4 mm
1.5 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 4 mm
EM311-2TL-015Archive
2.5 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 8 mm
2.5 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 8 mm
EM311-2TL-025Archive
3 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 8 mm
3 mm Carbide End Mill, 2 Flutes, Flat, Standard length, For P, M, K materials, AlCrN coated, Helix angle 35 degree, LOC 8 mm
EM311-2TL-030Archive